DIY Felt Flowers - Pom Pom types

There are quite a few felt flower designs out there. So i'm just going to call this the Pom Pom types.
I've done 3 different designs so far and today's one is just on the Pom Pom ones.

 step 1: Things that you will need - glue, scissors, felt and some clips. I'm using mini clothes pegs.

step 2: cut the felt into 30cm long by 4cm wide , fold it along the long side into half and glue the long open ends.  

Clip/Peg the sides as you don't want to spend your time pressing on to it while it dries. 

Meantime you can cut another piece of 30x4cm felt for another flower.

 step 3: once the glue has dried on the sides, snip at the folded edge.

 step 4: here's a clearer picture...you will start to see the "pom pom" frills appear now.

 step 5: once you have snipped along the entire 30cm length, apply glue on the un-snipped portion as shown in the photo and rolled it tightly like a ball from left to right along the glue area (or right to left, any direction is fine).

step 6: Voila. Pom Pom Felt flowers.
Are you all set to do some felt flowers now?

xoxo
velle